User manual

ADSP-BF538F EZ-KIT Lite Evaluation System Manual 2-1
2 ADSP-BF538F EZ-KIT LITE
HARDWARE REFERENCE
This chapter describes the hardware design of the ADSP-BF538F EZ-KIT
Lite board. The following topics are covered.
• “System Architecture” on page 2-2
Describes the ADSP-BF538F EZ-KIT Lite board configuration
and explains how the board components interface with the
processor.
• “Jumper and Switch Settings” on page 2-9
Shows the locations and describes the configuration jumpers and
switches.
• “LEDs and Push Buttons” on page 2-17
Shows the locations and describes the LEDs and push buttons.
• “Connectors” on page 2-20
Shows the locations and provides part numbers for the on-board
connectors. In addition, the manufacturer and part number infor-
mation is provided for the mating parts.