Datasheet

Application Note AN-1006
Rev. A | Page 3 of 16
USING THE USB INTERFACE WITH SIGMASTUDIO
INSTALLING THE DRIVERS
SigmaStudio must be installed to use the USBi. Once
SigmaStudio has been properly installed, connect the USBi to
an available USB port with the included USB cable. At this
point, Windows® XP recognizes the device and prompts the
user to install drivers.
08093-002
Figure 2. Found New Hardware Notification
Select the Install from a list or specific location (Advanced)
option and click Next >.
0
8093-003
Figure 3. Found New Hardware Wizard—Installation
Click Search for the best driver in these locations, then select
Include this location in the search. Click Browse to find the
SigmaStudio 3.0\USB drivers directory.
08093-004
Figure 4. Windows Found New Hardware Wizard—Search and
Installation Options
When the warning about Windows Logo testing appears on the
screen, click Continue Anyway.
08093-005
Figure 5. Windows Logo Testing Warning