Datasheet

Connectors
2-18 SHARC Audio EZ-Extender Manual
Expansion Interface II Connector (J1)
The board-to-board connector (J1) providing signals for the DAI and DPI
interfaces and general-purpose I/O (GPIO) signals of the mating
EZ-Board. J1 also provides the EZ-Extender’s power. Consequently, no
extra power supply is needed when using the product. The connector is
located on the left edge of the board. For availability and pricing of the
connector, contact Samtec.
RCA Audio Connectors (J2–7)
Analog audio channels via single-ended RCA connectors (J2—7).
Differential In/Out Connectors (P1–5)
The differential in and out connectors (P1—5) are intended for an evalua-
tion of the AD1939 codecs via XLR connectors. A standard, off the shelf
DB25 connector to XLR cables is required.
Part Description Manufacturer Part Number
60-position 0.1”, SMT socket SAMTEC SSW-130-22-F-D-VS
Mating Connector
60-position 0.1”, SMT header SAMTEC TSSH-130-01-L-DV-A
Part Description Manufacturer Part Number
RCA 2 x 3 KYOYAKU ENT WSP-256V1-09
Mating Cable (shipped with the EZ-Extender)
6' RCA audio cable CABLESTOGO 03171