Datasheet

Power LED (LED1)
2-18 WVGA/LCD EI3 Extender Board Manual
LCD Connector (P5)
The LCD connector (P5) is used to connect the LCD to the extender
board. The backlight power pins, four resistive touch pins, LCD SPI inter-
face, data, sync, and clock pins of the LCD connect to P5 via a single flex
cable.
Power LED (LED1)
When the power LED (LED1) lights solid (green), it indicates that the
power is being supplied to the board properly.
Part Description Manufacturer Part Number
0.65 mm power jack CUI 045-0883R
Mating Connector
5.0VDC@3.6A power supply GLOBETEK GS-1750(R)