Datasheet

Purpose of This Manual
viii Camera EI3 Extender Board Manual
The following is a list of the Camera EI3 Extender Board interfaces.
• Video interface
• Connects to Aptina headboards
• Video connectors
• One 13 × 2 IDC for 8-, 10- and 12-bit sensors
• One 13 × 1 IDC for 12-bit sensors; used in conjunction
with the 13 × 2 connector
• No power supply required: derives power from the EZ-KIT
Lite/EZ-Board
• Jumper for selecting CMOS sensor bus width
• CE certified
Purpose of This Manual
The Camera EI3 Extender Board Manual provides instructions for install-
ing the product hardware (board). The text describes operation and
configuration of the board components and provides guidelines for run-
ning your own code on the Camera EI3 Extender Board. Finally, a
schematic and a bill of materials are provided for reference.
Intended Audience
The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture,
instruction set, and C/C++ programming languages.