Datasheet

Camera EI3 Extender Board Manual vii
PREFACE
Thank you for purchasing the Camera EI3 Extender Board, an
EZ-Extender
®
product for EZ-KIT Lite
®
/EZ-Board
®
evaluation systems
with the expansion interface 3 (EI3).
The EZ-KIT Lite/EZ-Board and Camera EI3 Extender Board are
designed to be used in conjunction with the CrossCore
®
Embedded
Studio (CCES) development environment.
To learn more about Analog Devices development software, go to
http://www.analog.com/dsp/tools.
Product Overview
The Camera EI3 Extender Board is a separately sold daughter board that
plugs onto the expansion interface 3 (EI3) of an EZ-KIT Lite/EZ-Board
evaluation system. The extender board aids the design and prototyping
phases of embedded processor-targeted applications.
The board extends the capabilities of the evaluation system by providing a
connection between the parallel peripheral inte
rface (PPI) of the processor
and an Aptina CMOS sensor headboard. The two-wire interface (TWI)
port of the processor is used to communicate to the CMOS sensor on the
extender.