Datasheet

Connectors
2-6 Camera EI3 Extender Board Manual
Power Connector (P4)
Under normal circumstances, the power connector is not needed because
the Camera EI3 Extender Board derives its power from the EZ-KIT
Lite/EZ-Board. If the EZ-KIT Lite/Camera EI3 Extender Board is not
able to supply enough power to the Camera EI3 Extender Board, then an
external power supply can be connected to P4 which will power the Cam-
era EI3 Extender Board and EZ-KIT Lite/EZ-Board. The connector is
located on the bottom side of the board.
Part Description Manufacturer Part Number
0.65 mm power jack CUI 045-0883R
Mating Cable
5.0VDC@3.6A power supply GLOBETEK GS-1750(R)