Datasheet

Connectors
2-26 ADSP-BF609 EZ-KIT Lite Evaluation System Manual
JTAG Connector (ZP1)
ZP1 is the connecting point for the SADA2 debug interface and is a 14-pin
0.1” header.
Expansion Interface III Connectors (P1A–C, P2A,
P3A)
Five board-to-board connectors (P1A, P1B, P1C, P2A, and P3A) provide sig-
nals from the SPI, TWI, UART, SPORT, and GPIO interfaces of the
processor. The connectors are located on the bottom side of the board.
For more information, see “Expansion Interface III” on page 1-20.
USB Connector (P7)
Power Connector (P18)
Part Description Manufacturer Part Number
120-pin, 0.6 mm HIROSE FX8-120P-SV1(91)
Mating Connector
120-pin, 0.6 mm HIROSE FX8-120S-SV(21)
Part Description Manufacturer Part Number
USB mini-Ab MOLEX 56579-0576
Part Description Manufacturer Part Number
0.65 mm power jack CUI 045-0883R
Mating Connector
5.0VDC@3.6A power supply GLOBETEK GS-1750(R)