Datasheet

ADSP-BF609 EZ-KIT Lite Evaluation System Manual 2-19
ADSP-BF609 EZ-KIT Lite Hardware Reference
Boot Mode Select Switch (SW2)
The rotary boot mode select switch (SW2) determines the boot mode of the
processor. Table 2-13 shows the available boot mode settings. By default,
the ADSP-BF609 processor boots from 8-bit flash memory (parallel flash
boot).
SW5.1 OFF
SW5.2 OFF
Table 2-12. Multiple-Processor Configuration
Switch Position Main EZ-KIT Lite
Attached to Emulator
EZ-KIT Lite
Not Attached to Emulator
SW1.1 ON OFF
SW1.2 ON ON
SW1.3 ON OFF
SW1.4 ON ON
SW1.5 ON OFF
SW1.6 ON ON
SW1.7 ON OFF
SW1.8 ON ON
SW3.1 ON OFF
SW3.2 OFF OFF
SW4.1 OFF OFF
SW4.2 ON ON
SW5.1 OFF ON
SW5.2 ON OFF
Table 2-11. Single-Processor Configuration (Cont’d)
Switch Position Single EZ-KIT Lite Use (Default)