Datasheet

ADSP-BF609 EZ-KIT Lite Evaluation System Manual 2-1
2 ADSP-BF609 EZ-KIT LITE
HARDWARE REFERENCE
This chapter describes the hardware design of the ADSP-BF609 EZ-KIT
Lite board.
The following topics are covered.
• “System Architecture” on page 2-2
Describes the board’s configuration and explains how the board
components interface with the processor.
• “Software-Controlled Switches (SoftConfig)” on page 2-3
Lists and describes the processor signals routed through the soft-
ware-controlled switches.
• “Push Buttons and Switches” on page 2-17
Shows the locations and describes the push buttons and switches.
• “Power Jumpers” on page 2-21
Shows the locations and describes the configuration jumpers.
• “LEDs” on page 2-22
Shows the locations and describes the LEDs.
• “Connectors” on page 2-24
Shows the locations and provides part numbers for the on-board
connectors. In addition, the manufacturer and part number infor-
mation is provided for the mating parts.