Datasheet

EZ-KIT Lite Installation
1-6 ADSP-BF609 EZ-KIT Lite Evaluation System Manual
EZ-KIT Lite Installation
Follow these instructions to ensure correct operation of the product soft-
ware and hardware.
Step 1: Attach the provided USB plugs (labeled Mini and Male) to the pro-
vided USB cable.
Step 2: Connect the EZ-KIT Lite board to a personal computer (PC) run-
ning CCES.
There are two connection options: using an Analog Devices emulator or
using the standalone debug agent.
Using an Emulator:
1. Plug one side of the assembled USB cable into the USB connector
of the emulator. Plug the other side into a USB port of the PC run-
ning CCES.
2. Attach the emulator to the header connector P1 (labeled JTAG) on
the EZ-KIT Lite board.
Using the Debug Agent:
1. Attach the standalone debug agent to connectors P1 and ZP1 of the
EZ-KIT Lite board.
2. Plug one side of the provided USB cable into the USB connector of
the debug agent ZP1 (labeled USB). Plug the other side of the cable
into a USB port of the PC running CCES.