Datasheet

www.analog.com/blackﬁn

ADSP-BF538F EZ-KIT Lite

for Blackfin Processors

Overview

The ADSP-BF538F EZ-KIT Lite

provides developers with a cost-effective method

for initial evaluation of the ADSP-BF538F Blackfin

Processor via a USB-based, PC-

hosted tool set. With this EZ-KIT Lite, users can learn more about the Analog Devices

(ADI) ADSP-BF538F hardware and software development, and quickly prototype a

wide range of applications.

The EZ-KIT Lite includes an ADSP-BF538F Blackfin Processor desktop evaluation

board along with an evaluation suite of the VisualDSP++

development and debugging

environment, including the C/C++ compiler, assembler, and linker. The evaluation suite

of VisualDSP++ is designed to only be used with EZ-KIT Lite.

Additionally, the ADSP-BF538F EZ-KIT Lite contains the National Instruments (NI)

Educational Laboratory Virtual Instrumentation Suite (ELVIS) interface. This interface

will allow using the dc voltage and current measurement modules, oscilloscope and

bode analyzer modules, function generator, arbitrary waveform generator, and digital

I/O. NI ELVIS is a LabVIEW

™

-based design and prototype environment for university

science and engineering laboratories’ curricula. For more details, visit www.ni.com.

Key Features

ADSP-BF538F Blackﬁn Processor

64 MB (32 MB  16) SDRAM

4 MB (32 MB  16) ﬂash memory

UART—ADM3202 RS-232 line

driver/receiver

Audio

AD1871 96 kHz stereo ADC

AD1854 96 kHz stereo DAC

CAN

TJA1041—transceiver

2 RJ10 connectors

9 LEDs

Minimum Requirements

Pentium

166 MHz or higher,

minimum of 32 MB of RAM

Windows

2000, Windows XP

One available USB connector

•

PAGE 1
ADSP-BF538F EZ-KIT Lite for Blackfin Processors Key Features • ADSP-BF538F Blackfin Processor • 64 MB (32 MB  16) SDRAM • 4 MB (32 MB  16) flash memory • UART—ADM3202 RS-232 line driver/receiver Audio • AD1871 96 kHz stereo ADC • AD1854 96 kHz stereo DAC CAN® • TJA1041—transceiver • 2 RJ10 connectors • 9 LEDs Minimum Requirements • Pentium® 166 MHz or higher, minimum of 32 MB of RAM • Windows® 2000, Windows XP Overview • One available USB connector The ADSP-BF538F EZ-KIT Lite® provides developers with
PAGE 2
The VisualDSP++ development and debugging environment, along with the advanced on-board USB-based debug agent interface that operates up to 12 Mbps, enables users to perform standard debugging functions (such as read and write memory, read and write registers, load and execute executables, set and clear breakpoints, single-step assembly, C, and C++ source code). The evaluation versions of the included software tools are limited to use with the EZ-KIT Lite.