Datasheet

ADXL103/ADXL203 Data Sheet
Rev. D | Page 4 of 16
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
Acceleration (Any Axis, Unpowered) 3500 g
Acceleration (Any Axis, Powered) 3500 g
Drop Test (Concrete Surface) 1.2 m
V
S
−0.3 V to +7.0 V
All Other Pins
(COM − 0.3 V) to
(V
S
+ 0.3 V)
Output Short-Circuit Duration
(Any Pin to Common)
Indefinite
Temperature Range (Powered) −55°C to +125°C
Temperature Range (Storage) −65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress rating
only; functional operation of the device at these or any other
conditions above those indicated in the operational section of
this specification is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Table 3. Package Characteristics
Package Type θ
JA
θ
JC
Device Weight
8-Terminal Ceramic LCC 120°C/W 20°C/W <1.0 gram
ESD CAUTION
t
P
t
L
t 25°C TO PEAK
t
S
PREHEAT
CRITICAL ZONE
T
L
TO T
P
TEMPERATURE
TIME
RAMP-DOWN
RAMP-UP
T
SMIN
T
SMAX
T
P
T
L
03757-102
Figure 2. Recommended Soldering Profile
Table 4. Solder Profile Parameters
Test Condition
Profile Feature Sn63/Pb37 Pb-Free
Average Ramp Rate (T
L
to T
P
) 3°C/second maximum 3°C/second maximum
Preheat
Minimum Temperature (T
SMIN
) 100°C 150°C
Maximum Temperature (T
SMAX
) 150°C 200°C
Time (T
SMIN
to T
SMAX
) (t
S
) 60 seconds to 120 seconds 60 seconds to 150 seconds
T
SMAX
to T
L
Ramp-Up Rate 3°C/second 3°C/second
Time Maintained above Liquidous (T
L
)
Liquidous Temperature (T
L
) 183°C 217°C
Time (t
L
) 60 seconds to 150 seconds 60 seconds to 150 seconds
Peak Temperature (T
P
) 240°C + 0°C/−5°C 260°C + 0°C/−5°C
Time Within 5°C of Actual Peak Temperature (t
P
) 10 seconds to 30 seconds 20 seconds to 40 seconds
Ramp-Down Rate 6°C/second maximum 6°C/second maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum