Datasheet

ADV3219/ADV3220
Rev. 0 | Page 3 of 20
SPECIFICATIONS
V
S
= ±5 V, T
A
= 25°C, R
L
= 150 Ω, C
L
= 4 pF, ADV3219 at G = +1, ADV3220 at G = +2, unless otherwise noted.
Table 1.
ADV3219 ADV3220
Parameter Conditions Min Typ Max Min Typ Max Unit
DYNAMIC PERFORMANCE
−3 dB Bandwidth 200 mV p-p 840 800 MHz
2 V p-p 600 730 MHz
Gain Flatness 0.1 dB, 200 mV p-p 100 100 MHz
0.1 dB, 2 V p-p 100 100 MHz
Propagation Delay 2 V p-p 700 650 ps
Settling Time 1%, 2 V step 5 5 ns
Slew Rate 2 V step, peak 2200 2800 V/μs
NOISE/DISTORTION PERFORMANCE
Differential Gain Error NTSC or PAL 0.02 0.02 %
Differential Phase Error NTSC or PAL 0.02 0.02 Degrees
Crosstalk f = 100 MHz −70 −60 dB
f = 5 MHz −90 −82 dB
Off Isolation, Input-Output f = 100 MHz, one channel −83 −82 dB
Input Second-Order Intercept f = 70 MHz, ADV3220, R
L
= 100 Ω 47 dBm
Input Third-Order Intercept f = 70 MHz, ADV3220, R
L
= 100 Ω 34 dBm
Output 1 dB Compression Point f = 70 MHz, ADV3220, R
L
= 100 Ω 20 dBm
Input Voltage Noise 10 MHz to 100 MHz 16 17 nV/√Hz
DC PERFORMANCE
Gain Error No load 1 1 %
R
L
= 150 Ω 0.75 1.1 0.75 1.1 %
Gain Matching Channel-to-channel, no load 1 1 %
OUTPUT CHARACTERISTICS
Output Impedance DC, enabled 0.02 0.04 Ω
Disabled 1 1 MΩ
Output Disable Capacitance Disabled 1.0 1.2 pF
Output Leakage Current Disabled 2 2 μA
Output Voltage Range No load 2.9 ±3 2.9 ±3 V
Load 2.8 ±3 2.75 ±3 V
Short-circuit current 50 50 mA
INPUT CHARACTERISTICS
Input Offset Voltage Worst case (all configurations) ±5 21 ±5 21 mV
Input Offset Voltage Drift ±10 ±10 μV/°C
Input Voltage Range No load ±3 ±1.5 V
R
L
= 150 Ω ±3 ±1.5 V
Input Capacitance Any switch configuration 0.6 0.6 pF
Input Resistance Output enabled 1 10 1 10 MΩ
Input Bias Current Output enabled 5 12 6 12 μA
SWITCHING CHARACTERISTICS
Enable On Time 15 15 ns
Switching Time, 2 V Step 50% SELECT to 1% settling 20 20 ns
Switching Transient (Glitch) IN0 to IN1 switching 70 100 mV p-p