Datasheet

ADV3200/ADV3201
Rev. 0 | Page 3 of 36
SPECIFICATIONS
OSD DISABLED
V
S
= ±2.5 V (ADV3200), V
S
= ±3.3 V (ADV3201) at T
A
= 25°C, G = +1 (ADV3200), G = +2 (ADV3201), R
L
= 150 Ω, all configurations,
unless otherwise noted.
Table 1.
Parameter Test Conditions/Comments Min Typ Max Unit
DYNAMIC PERFORMANCE
−3 dB Bandwidth 200 mV p-p 300 MHz
2 V p-p 120 MHz
Gain Flatness 0.1 dB, 200 mV p-p 60 MHz
0.1 dB, 2 V p-p 40 MHz
Settling Time 1%, 2 V step 6 ns
Slew Rate 2 V step, peak 400 V/μs
NOISE/DISTORTION PERFORMANCE
Differential Gain Error NTSC or PAL
ADV3200 0.06 %
ADV3201 0.1 %
Differential Phase Error NTSC or PAL
ADV3200 0.06 Degrees
ADV3201 0.03 Degrees
Crosstalk, All Hostile, RTI f = 5 MHz, R
L
= 150 Ω −48 dB
f = 5 MHz, R
L
= 1 kΩ −65 dB
f = 100 MHz, R
L
= 150 Ω −23 dB
f = 100 MHz, R
L
= 1 kΩ −30 dB
Off Isolation, Input-to-Output, RTI f = 5 MHz, one channel −80 dB
Input Voltage Noise 0.1 MHz to 50 MHz
ADV3200 25 nV/√Hz
ADV3201 22 nV/√Hz
DC PERFORMANCE
Gain Error
ADV3200 No load (broadcast mode) ±0.5 ±1.75 %
Broadcast mode ±0.5 ±2.2 %
ADV3201 No load (broadcast mode) ±0.5 ±2.2 %
Broadcast mode ±0.5 ±2.7 %
Gain Matching No load, channel-to-channel ±0.5 ±2.8 %
Channel-to-channel ±0.8 ±3.4 %
OUTPUT CHARACTERISTICS
Output Impedance DC, enabled 0.15 Ω
ADV3200 DC, disabled 900 1000 kΩ
ADV3201 DC, disabled 3.2 4 kΩ
Output Capacitance Disabled 3.7 pF
Output Voltage Range
ADV3200 −1.1 to +1.1 −1.2 to +1.2 V
ADV3201 −1.5 to +1.5 −1.6 to +2.0 V
No output load −1.5 to +1.5 −2.0 to +2.0 V
INPUT CHARACTERISTICS
Input Offset Voltage ±5 ±30 mV
Input Voltage Range
ADV3200 −1.1 to +1.1 −1.2 to +1.2 V
ADV3201 −0.75 to +0.75 −0.8 to +1.0 V
No output load −0.75 to +0.75 −1.0 to +1.0 V