Datasheet

ADuM1250/ADuM1251 Data Sheet
Rev. H | Page 6 of 16
DIN V VDE V 0884-10 (VDE V 0884-10) INSULATION CHARACTERISTICS
This isolator is suitable for reinforced isolation only within the safety limit data. Maintenance of the safety data is ensured by protective
circuits. The asterisk (*) marking on the package denotes DIN V VDE V 0884-10 approval for a 560 V peak working voltage.
Table 6.
Description Test Conditions/Comments Symbol Characteristic Unit
Installation Classification per DIN VDE 0110
For Rated Mains Voltage ≤ 150 V rms I to IV
For Rated Mains Voltage ≤ 300 V rms I to III
For Rated Mains Voltage ≤ 400 V rms I to II
Climatic Classification 40/105/21
Pollution Degree per DIN VDE 0110, Table 1 2
Maximum Working Insulation Voltage V
IORM
560 V peak
Input to Output Test Voltage, Method B1
V
IORM
× 1.875 = V
PR
, 100% production test, t
m
= 1 sec,
partial discharge < 5 pC
V
PR
1050 V peak
Input to Output Test Voltage, Method A V
IORM
× 1.6 = V
PR
, t
m
= 60 sec, partial discharge < 5 pC V
PR
After Environmental Tests Subgroup 1 896 V peak
After Input and/or Safety Tests Subgroup 2
and Subgroup 3
V
IORM
× 1.2 = V
PR
, t
m
= 60 sec, partial discharge < 5 pC 672 V peak
Highest Allowable Overvoltage Transient overvoltage, t
TR
= 10 sec V
TR
4000 V peak
Safety Limiting Values
Maximum value allowed in the event of a failure
(see Figure 3)
Case Temperature T
S
150 °C
V
DD1
+ V
DD2
Current I
TMAX
212 mA
Insulation Resistance at T
S
V
IO
= 500 V R
S
>10
9
Ω
CASE TEMPERATURE (°C)
SAFETY-LIMITING CURRENT (mA)
0
0
350
50 100 150 200
50
300
150
100
200
250
06113-003
Figure 3. Thermal Derating Curve, Dependence of Safety-Limiting Values on
Case Temperature, per DIN V VDE V 0884-10
RECOMMENDED OPERATING CONDITIONS
Table 7.
Parameter Rating
Operating Temperature (T
A
)
A Grade −40°C to +105°C
S Grade −40°C to +125°C
Supply Voltages (V
DD1
, V
DD2
)
1
3.0 V to 5.5 V
Input/Output Signal Voltage
(V
SDA1
, V
SCL1
, V
SDA2
, V
SCL2
)
5.5 V
Capacitive Load
Side 1 (C
L1
) 40 pF
Side 2 (C
L2
) 400 pF
Static Output Loading
Side 1 (I
SDA1
, I
SCL1
) 0.5 mA to 3 mA
Side 2 (I
SDA2
, I
SCL2
) 0.5 mA to 30 mA
1
All voltages are relative to their respective ground. See the Magnetic Field
Immunity section for information about immunity to external magnetic
fields.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.