Datasheet

Data Sheet ADT7470
Rev. E | Page 5 of 40
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Rating
Positive Supply Voltage (V
CC
) 6.5 V
Voltage on Any TACH or PWM Pin
–0.3 V to +6.5 V
Voltage on Any Input or Output Pin –0.3 V to V
CC
+ 0.3 V
Maximum Junction Temperature (T
J
max) 150°C
Storage Temperature Range –65°C to +150°C
Lead Temperature, Soldering
Vapor Phase, 60 sec
215°C
Infrared, 15 sec
200°C
ESD Rating (HBM) 3000 V
THERMAL CHARACTERISTICS
16-Lead QSOP Package:
θ
JA
= 105°C/W
θ
JC
= 39°C/W
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION