Datasheet

ADP8863
Rev. A | Page 47 of 52
First Phototransistor Register: High Byte (PH1LEVH)—Register 0x22
Table 79. PH1LEVH Bit Map
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reserved PH1LEV_HIGH
Table 80. Bit Descriptions for the PH1LEVH Register
Bit Name Bit No. Description
N/A [7:5] Reserved.
PH1LEV_HIGH [4:0]
Upper five bits of the 13-bit conversion value for the first light sensor (Bit 12 to Bit 8). The value is
updated every 80 ms (when the light sensor is enabled). This is a read-only register.
Second Phototransistor Register: Low Byte (PH2LEVL)—Register 0x23
Table 81. PH2LEVL Bit Map
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
PH2LEV_LOW
Table 82. Bit Descriptions for the PH2LEVL Register
Bit Name Bit No. Description
PH2LEV_LOW [7:0]
Lower eight bits of the 13-bit conversion value for the second light sensor (Bit 7 to Bit 0). The value is
updated every 80 ms (when the light sensor is enabled). This is a read-only register.
Second Phototransistor Register: High Byte (PH2LEVH)—Register 0x24
Table 83. PH2LEVH Bit Map
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Reserved PH2LEV_HIGH
Table 84. Bit Descriptions for the PH2LEVH Register
Bit Name Bit No. Description
N/A [7:5] Reserved
PH2LEV_HIGH [4:0]
Upper five bits of the 13-bit conversion value for the second light sensor (Bit 12 to Bit 8). The value is
updated every 80 ms (when the light sensor is enabled). This is a read-only register.