Datasheet

ADP8863
Rev. A | Page 25 of 52
Table 8. Register Set Definitions
Address (Hex) Register Name Description
0x00 MFDVID Manufacturer and device ID
0x01 MDCR Device mode and status
0x02 MDCR2 Device mode and Status Register 2
0x03 INTR_EN Interrupts enable
0x04 CFGR Configuration register
0x05 BLSEN Sink enable, backlight or independent
0x06 BLOFF Backlight off timeout
0x07 BLDIM Backlight dim timeout
0x08 BLFR Backlight fade in and fade out rates
0x09 BLMX1 Backlight (brightness Level 1—daylight) maximum current
0x0A BLDM1 Backlight (brightness Level 1—daylight) dim current
0x0B BLMX2 Backlight (brightness Level 2—office) maximum current
0x0C BLDM2 Backlight (brightness Level 2—office) dim current
0x0D BLMX3 Backlight (brightness Level 3—dark) maximum current
0x0E BLDM3 Backlight (brightness Level 3—dark) dim current
0x0F ISCFR Independent sink current fade control register
0x10 ISCC Independent sink current control register
0x11 ISCT1 Independent sink current timer register, LED[7:5]
0x12 ISCT2 Independent sink current timer register, LED[4:1]
0x13 ISCF Independent sink current fade register
0x14 ISC7 Independent sink current, LED7
0x15 ISC6 Independent sink current, LED6
0x16 ISC5 Independent sink current, LED5
0x17 ISC4 Independent sink current, LED4
0x18 ISC3 Independent sink current, LED3
0x19 ISC2 Independent sink current, LED2
0x1A ISC1 Independent sink current, LED1
0x1B CCFG Comparator configuration
0x1C CCFG2 Second comparator configuration
0x1D L2_TRP L2 comparator reference
0x1E L2_HYS L2 hysteresis
0x1F L3_TRP L3 comparator reference
0x20 L3_HYS L3 hysteresis
0x21 PH1LEVL First phototransistor ambient light level—low byte register
0x22 PH1LEVH First phototransistor ambient light level—high byte register
0x23 PH2LEVL Second phototransistor ambient light level—low byte register
0x24 PH2LEVH Second phototransistor ambient light level—high byte register