Datasheet

ADP8861 Data Sheet
Rev. B | Page 32 of 40
Bit Name Bit No. Description
SC4_EN 3 This enable acts upon LED4
1 = SC4 is turned on
0 = SC4 is turned off
SC3_EN
2
This enable acts upon LED3
1 = SC3 is turned on
0 = SC3 is turned off
SC2_EN
1
This enable acts upon LED2
1 = SC2 is turned on
0 = SC2 is turned off
SC1_EN 0 This enable acts upon LED1
1 = SC1 is turned on
0 = SC1 is turned off
Independent Sink Current Time (ISCT1)—Register 0x11
Table 35. ISCT1 Bit Map
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
SCON
SC7_OFF
SC6_OFF
SC5_OFF
Table 36. Bit Descriptions for the ISCT1 Register
Bit Name Bit No. Description
1
SCON [7:6]
SC on time. If the SCx_OFF time is not disabled and the independent current sink is enabled (Register
0x10), the LED(s) remains on for the on time selected (per the following list) and then turns off.
00 = 0.2 sec
01 = 0.6 sec
10 = 0.8 sec
11 = 1.2 sec
SC7_OFF [5:4]
SC7 off time. When the SC off time is disabled, the ISC remains on while enabled. When the SC off time is
set to any other value, then the ISC turns off for the off time (per the following listed times) and then turns
on according to the SCON setting.
00 = off time disabled
01 = 0.6 sec
10 = 1.2 sec
11 = 1.8 sec
SC6_OFF [3:2]
SC6 off time. When the SC off time is disabled, the ISC remains on while enabled. When the SC off time is
set to any other value, then the ISC turns off for the off time (per the following listed times) and then turns
on according to the SCON setting.
00 = off time disabled
01 = 0.6 sec
10 = 1.2 sec
11 = 1.8 sec
SC5_OFF [1:0]
SC5 off time. When the SC off time is disabled, the ISC remains on while enabled. When the SC off time is
set to any other value, then the ISC turns off for the off time (per the following listed times) and then turns
on according to the SCON setting.
00 = off time disabled
01 = 0.6 sec
10 = 1.2 sec
11 = 1.8 sec
1
Each current sink remains on continuously when its enable is set to 1 and its off time is set to 00 (disabled).