Datasheet

EVAL-ADP8860
Rev. 0 | Page 8 of 24
USING THE SOFTWARE
1
2
3
4
5
6
7
1 – VIEW/MODIFY OPTIONS AND INTERRUPTS
2 – VIEW/MODIFY BACKLIGHT PARAMETERS
3 – VIEW/MODIFY INDIVIDUAL SINKS PARAMETERS
4 – VIEW/MODIFY COMPARATORS PARAMETERS
5 – VIEW/MODIFY ACTIVATIONS
6 – VIEW/MODIFY REGISTERS (BIT/BYTE LEVEL)
7 – GUI COMMANDS AND CONTROLS
07988-015
Figure 15. Evaluation Board Software
Before running the software, ensure that the board is connected
to the computer USB port. You can verify this if the Vxxx-
OKAY LEDs light up.
To run the ADP8860 GUI, click Start > All Programs > Analog
Devices > ADP8860 Evaluation Software 0_x > ADP8860
Evaluation SW. Failure to detect the adapter board prompts an
error message as indicated in Figure 16. If this happens, check
the connection and restart the program.
07988-016
Figure 16. Board Detection Failure