Datasheet

EVAL-ADP8860

Rev. 0 | Page 7 of 24

To run the ADP8860 GUI, click Start > All Programs > Analog

Devices > ADP8860 Evaluation Software 0_x > ADP8860

Evaluation SW. If the program starts correctly and the board is

detected, the ADP8860 GUI appears as shown in Figure 14. The

program default settings are as follows:

• All registers are initialized to zero.

• Comparators unit is in lux.

• Enable History Log is unchecked (data exchanged with

the ADP8860 is not logged).

• Read Refresh option is unchecked (status registers are not

read periodically).

• Refresh delay is 1000 ms.

• Smart Update option is checked (any change to the

registers control triggers a write operation to the device).

• Verify after Write option is unchecked (a write operation

is not verified).

READ/WRITER

REGISTERS

(GUIDED VIEW)

READ/WRITE

REGISTERS

APPLICATION

STOP

APPLICATION

WRITE DEVICE

REGISTERS

READ DEVICE

REGISTERS

LOAD/SAVE

CONFIGURATION

07988-014

Figure 14. ADP8860 GUI