Datasheet

EVAL-ADP8860

Rev. 0 | Page 3 of 24

INSTALLING THE SOFTWARE

Before starting the software installation, make sure that the

ADP8860 adapter board is not connected to the USB port

of the PC.

Note: If the PC has LabVIEW™ already installed, this following

step is not needed.

The application software is a compiled LabVIEW program requir-

ing that the LabVIEW 8.5, or later version, run-time engine be

installed on the PC. You can download the LabVIEW run-time

engine on National Instrument’s website. A LabVIEW 8.5 run-

time installation is available in the ADP8860 installation CD.

After installation, it may be necessary to reboot the PC to

complete the operation.

1. Launch the Setup.exe file. When the dialog box shown

in Figure 2 appears, click Next> to continue.

7988-002

Figure 2. ADP8860 Evaluation Software Setup

2. Click Ye s to accept the license agreement (see Figure 3).

07988-003

Figure 3. License Agreement

3. Click Next> to install the files to the default destination folder

or click Browse… to choose a different file (see Figure 4).

07988-004

Figure 4. Choose Destination Location

4. Select the Typical set up type and click Next> to continue

with the installation (see Figure 5).

07988-005

Figure 5. Setup Type