Datasheet

ADP5065 Data Sheet
Rev. D | Page 26 of 40
REGISTER BIT DESCRIPTIONS
Table 15. Manufacturer and Model ID, Register Address 0x00 Bit Descriptions
Bit No. Mnemonic Access Default Description
[7:4]
MANUF[3:0]
R
0001
The 4-bit manufacturer identification bus.
[3:0] MODEL[3:0] R 1000 The 4-bit model identification bus.
Table 16. Silicon Revision, Register Address 0x01 Bit Descriptions
Bit No.
Mnemonic
Access
Default
Description
[7:4] Not Used R
[3:0] REV[3:0] R 0101 The 4-bit silicon revision identification bus.
Table 17. VINx Settings, Register Address 0x02 Bit Descriptions
Bit No. Mnemonic Access Default Description
[7:5] Not Used R
4 RFU R/W 0 Reserved for future use.
[3:0] ILIM[3:0] R/W 0000 = 100 mA VINx pin input current-limit programming bus. The current into VINx
can be limited to the following programmed values:
0000 = 100 mA.
0001 = 150 mA.
0010 = 200 mA.
0011 = 300 mA.
0100 = 400 mA.
0101 = 500 mA.
0110 = 600 mA.
0111 = 700 mA.
1000 = 800 mA.
1001 = 900 mA.
1010 = 1000 mA.
1011 = 1100 mA.
1100 = 1200 mA.
1101 = 1300 mA.
1110 = 1400 mA.
1111 = 1500 mA.