Datasheet

Data Sheet ADP5062
Rev. B | Page 37 of 44
VINx Capacitor Selection
According to the USB 2.0 specification, USB peripherals have a
detectable change in capacitance on VBUS when they are attached
to a USB port. The peripheral device VBUS bypass capacitance
must be at least 1 µF but not larger than 10 µF.
The VINx input of the ADP5062 is tolerant of voltages as high
as 20 V; however, if an application requires exposing the VINx
input to voltages of up to 20 V, the voltage range of the capacitor
must also be above 20 V. Suggestions for a VINx capacitor are
given in Table 36.
When using ceramic capacitors, a higher voltage range is usually
achieved by selecting a component with larger physical dimensions.
In applications where lower than 20 V at VINx input voltages can
be guaranteed, smaller output capacitors can be used accordingly.
Table 34. ISO_Bx and ISO_Sx Capacitor Suggestions
Vendor Part Number Value Voltage Size
Murata GRM31CR61A226KE19 22 μF 10 V 1206
Murata GRM31CR60J226ME19 22 μF 6.3 V 1206
TDK C3216X5R0J226M 22 µF 6.3 V 1206
Taiyo-
Yuden
JMK316ABJ226KL 22 µF 6.3 V 1206
Table 35. CBP Capacitor Suggestions
Vendor Part Number Value Voltage Size
Murata GRM15XR71C103KA86 10 nF 16 V 0402
TDK C1005X7R1C103K 10 nF 16 V 0402
Table 36. VINx Capacitor Suggestions
Vendor Part Number Value Voltage Size
Murata GRM21BR61E106MA73 10 µF 25 V 0805
TDK C2012X5R1E106K 10 µF 25 V 0805