Datasheet
Table Of Contents
- Features
- Applications
- General Description
- Typical Application Circuit
- Revision History
- Specifications
- Absolute Maximum Ratings
- Pin Configuration and Function Descriptions
- Typical Performance Characteristics
- Theory of Operation
- Applications Information
- Power Dissipation and Thermal Considerations
- PCB Layout Guidelines
- Typical Application Schematics
- Outline Dimensions
ADP5024 Data Sheet
Rev. E | Page 6 of 28
INPUT AND OUTPUT CAPACITOR, RECOMMENDED SPECIFICATIONS
T
A
= −40°C to +125°C, unless otherwise specified.
Table 5.
Parameter
Symbol
Min
Typ
Max
Unit
NOMINAL INPUT AND OUTPUT CAPACITOR RATINGS
BUCK1, BUCK2 Input Capacitor Ratings
C
MIN1
, C
MIN2
4.7
40
µF
BUCK1, BUCK2 Output Capacitor Ratings C
MIN1
, C
MIN2
10 40 µF
LDO
1
Input and Output Capacitor Ratings C
MIN3
, C
MIN4
1.0 µF
CAPACITOR ESR
R
ESR
0.001
1
Ω
1
The minimum input and output capacitance should be greater than 0.70 µF over the full range of operating conditions. The full range of operating conditions in the
application must be considered during device selection to ensure that the minimum capacitance specification is met. X7R- and X5R-type capacitors are
recommended; Y5V and Z5U capacitors are not recommended for use because of their poor temperature and dc bias characteristics.