Datasheet

REV. B
ADP3300
–3–
ABSOLUTE MAXIMUM RATINGS*
Input Supply Voltage . . . . . . . . . . . . . . . . . . . . –0.3 V to +16 V
Shutdown Input Voltage . . . . . . . . . . . . . . . . . –0.3 V to +16 V
Error Flag Output Voltage . . . . . . . . . . . . . . . . –0.3 V to +16 V
Noise Bypass Pin Voltage . . . . . . . . . . . . . . . . . –0.3 V to +5 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . Internally Limited
Operating Ambient Temperature Range . . . . –55°C to +125°C
Operating Junction Temperature Range . . . . –55°C to +125°C
θ
JA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165°C/W
θ
JC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/W
Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . . . 300°C
Vapor Phase (60 sec ) . . . . . . . . . . . . . . . . . . . . . . . . . . 215° C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C
*This is a stress rating only; operation beyond these limits can cause the device to
be permanently damaged.
PIN FUNCTION DESCRIPTIONS
Pin Mnemonic Function
1 GND Ground Pin
2 NR Noise Reduction Pin. Used for further
reduction of the output noise (see text for
details). No connection if not used.
3 SD Active Low Shutdown Pin. Connect to
ground to disable the regulator output.
When shutdown is not used, this pin should
be connected to the input pin.
4 OUT Output of the Regulator, fixed 2.7, 3.0, 3.2,
3.3 or 5 volts output voltage. Bypass to
ground with a 0.47 µF or larger capacitor.
5 IN Regulator Input
6 ERR Open Collector Output which goes low to
indicate that the output is about to go out
of regulation.
Model Voltage Output Package Description Package Options Branding Information
ADP3300ART-2.7 2.7 V Surface Mount SOT-23-6 LAB
ADP3300ART-2.85 2.85 V Surface Mount SOT-23-6 LFB
ADP3300ART-3 3.0 V Surface Mount SOT-23-6 LBB
ADP3300ART-3.2 3.2 V Surface Mount SOT-23-6 LCB
ADP3300ART-3.3 3.3 V Surface Mount SOT-23-6 LDB
ADP3300ART-5 5.0 V Surface Mount SOT-23-6 LEB
Contact the factory for the availability of other output voltage options.
ORDERING GUIDE
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the ADP3300 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
PIN CONFIGURATION
1
2
3
6
5
4
TOP VIEW
(Not to Scale)
OUT
NR
GND
IN
ERR
SD
ADP3300