Datasheet

ADP3050 Data Sheet
Rev. C | Page 4 of 20
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Rating
IN Voltage
Continuous −0.3 V to +40 V
Peak (<100 ms) −0.3 V to +60 V
BOOST Voltage
Continuous −0.3 V to +45 V
Peak (<100 ms) −0.3 V to +65 V
SD, BIAS Voltage
−0.3 V to IN + 0.3 V
FB Voltage
−0.3 V to +8 V
COMP Voltage −0.3 V to IN + 0.3 V
SWITCH Voltage −0.3 V to IN + 0.3 V
Operating Ambient Temperature Range −40°C to +85°C
Operating Junction Temperature Range −40°C to +125°C
Storage Temperature Range −65°C to +150°C
θ
JA
(4-Layer PCB)
1
60.6°C/W
θ
JA
(4-Layer PCB)
2
87.5°C/W
Lead Temperature (Soldering, 60 sec) 300°C
1
Applied to all models that are not Pb-free.
2
Applied to all Pb-free models.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION