Datasheet

ADP2325 Data Sheet
Rev. A | Page 26 of 32
SOFT START TIME PROGRAMMING
The soft start feature allows the output voltage to ramp up in
a controlled manner, eliminating output voltage overshoot
during soft start and limiting inrush current. The soft start
time is set to 3 ms.
nF5.17
V6.0
ms3μA5.3
V6.0
=
×
=
×
=
SSSS
SS
tI
C
Choose a standard component value of C
SS1
= C
SS2
= 22 nF.
INPUT CAPACITOR SELECTION
A minimum 10 µF ceramic capacitor is required, placed near
the PVINx pin. In this application, one X5R ceramic capacitor of
10 µF and 25 V is recommended.