Datasheet

Data Sheet ADP195
Rev. C | Page 5 of 12
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
VIN VOUT
12
EN
A
B GND
TOP VIEW
(Not to Scale)
08679-003
ADP195
TOP VIEW
(Not to Scale)
3GND
1VOUT1
NOTES
1. THE EXPOSED PAD MUST BE CONNECTED TO GND.
2VOUT2
4EN
6VIN1
5VIN2
08679-104
Figure 3. 4-Ball WLCSP Pin Configuration Figure 4. 6-Lead LFCSP Pin Configuration
Table 4. WLCSP Pin Function Descriptions
Pin No. Mnemonic Description
A1 VIN Input Voltage.
A2 VOUT Output Voltage.
B1 EN Enable Input. Drive EN high to turn on the switch and drive EN low to turn off the switch.
B2 GND Ground.
Table 5. LFCSP Pin Function Descriptions
Pin No. Mnemonic Description
1 VOUT1 Output Voltage. Connect VOUT1 and VOUT2 together.
2 VOUT2 Output Voltage. Connect VOUT1 and VOUT2 together.
3 GND Ground.
4 EN Enable Input. Drive EN high to turn on the switch and drive EN low to turn off the switch.
5 VIN2 Input Voltage. Connect VIN1 and VIN2 together.
6 VIN1 Input Voltage. Connect VIN1 and VIN2 together.
EP EP The exposed pad must be connected to ground.