Datasheet

ADP1710/ADP1711
Rev. 0 | Page 5 of 16
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
IN
G
ND
EN
OUT
NC
1
2
3
5
4
NC = NO CONNECT
ADP1710
FIXED
TOP VIEW
(Not to Scale)
06310-004
IN
G
ND
EN
OUT
ADJ
1
2
3
5
4
ADP1710
ADJUSTABLE
TOP VIEW
(Not to Scale)
06310-005
IN
GND
EN
OUT
BYP
1
2
3
5
4
ADP1711
TOP VIEW
(Not to Scale)
06310-006
Figure 4. 5-Lead TSOT (UJ-Suffix) Figure 5. 5-Lead TSOT (UJ-Suffix) Figure 6. 5-Lead TSOT (UJ-Suffix)
Table 4. Pin Function Descriptions
ADP1710
Fixed
Pin No.
ADP1710
Adjustable
Pin No.
ADP1711
Pin No.
Mnemonic Description
1 1 1 IN Regulator Input Supply. Bypass IN to GND with a 1 μF or greater capacitor.
2 2 2 GND Ground.
3 3 3 EN
Enable Input. Drive EN high to turn on the regulator; drive it low to turn off the
regulator. For automatic startup, connect EN to IN.
4 NC No Connect.
4 ADJ Adjust. A resistor divider from OUT to ADJ sets the output voltage.
4 BYP
Connect a 1 nF or greater capacitor (10 nF is recommended) between BYP and GND
to reduce the internal reference noise for low noise applications.
5 5 5 OUT Regulated Output Voltage. Bypass OUT to GND with a 1 μF or greater capacitor.