Datasheet

EVAL-ADP1710/ADP1711
Rev. 0 | Page 4 of 8
EVALUATION BOARD CONFIGURATIONS
The ADP1710/ADP1711 evaluation boards come supplied with
different components depending on which version is ordered.
Components common to all versions are C1, C2, and J1.
ADP1710 ADJUSTABLE OUTPUT
Evaluation boards that come supplied with ADP1710 adjustable
output voltage option devices have the additional R1 and R2
resistors included. Figure 3 shows the schematic of this
evaluation board configuration.
IN
GND
EN
OUT
1
2
3
5
4
ADP1710
ADJUSTABLE
U1
C1
C2
R1
R2
J1
ADJ
V
IN
V
OUT
06311-004
Figure 3. ADP1710 Adjustable Output
The output voltage is set based on the following equation:
V
OUT
= 0.8 V (1 + R1/R2)
For example, if R1 = 10 kΩ and R2 = 4.99 kΩ, then V
OUT
is 2.403 V.
ADP1711 FIXED OUTPUT WITH BYPASS
CAPACITOR
Evaluation boards that come supplied with ADP1711 fixed
output voltage option devices with a bypass capacitor have C3
populated. Figure 4 shows the schematic of this evaluation
board configuration.
IN
GND
EN
OUT
1
2
3
5
4
U1
A
DP1711
C1
C2
J1
C3
BYP
V
IN
V
OUT
06311-005
Figure 4. ADP1711 Fixed Output with Bypass Capacitor