Datasheet

EVAL-ADP1710/ADP1711
Rev. 0 | Page 3 of 8
EVALUATION BOARD HARDWARE AND SCHEMATIC
NC = NO CONNECT
IN
GND
EN
OUT
1
2
3
5
4
U1
NC/
ADJ/
BYP
GND
GND GND
GND
J1
R1
R2
C1 C2
VOUT
VIN
C3
EN NC/ADJ/BYP
0
6311-002
Figure 2. Evaluation Board Schematic
Table 1. Evaluation Board Hardware Components
Component Function Description
U1
1
Linear regulator ADP1710/ADP1711 Low Dropout Linear Regulator.
C1 Input capacitor 1 µF Input Bypass Capacitor.
C2 Output capacitor 1 F Output Capacitor. Required for stability and transient performance.
C3
2
Bypass capacitor 10 nF Bypass Capacitor.
R1, R2
3
Output voltage adjust resistors External Resistors. Used to set VOUT with the adjustable version of ADP1710.
J1 Jumper Jumper. Connects EN to VIN for automatic startup.
1
Component varies depending on which evaluation board type is ordered.
2
Component present only on boards with ADP1711 fixed output devices.
3
Components present only on boards with ADP1710 adjustable output devices.