Datasheet

EVAL-ADP130
Rev. 0 | Page 3 of 8
EVALUATION BOARD SCHEMATIC AND HARDWARE
ADP130
1
VIN
2
GND
3
EN
5
VOUT
4
VBIAS
+
V
IN
V
OUT
U1
C1
+
C2
V
BIAS
+
C3
J1
06965-002
Figure 2. Evaluation Board Schematic
Table 1. Evaluation Board Hardware Components
Component Function Description
U1
1
Linear regulator ADP130 low dropout linear regulator.
C1 Input capacitor
A 1 μF input bypass capacitor, which is required for stability and transient performance. Connect C1 from
VIN to GND.
C2 Output capacitor
A 1 μF output capacitor, which is required for stability and transient performance. Connect C2 from
VOUT to GND.
C3 Bias capacitor A 1 μF bias bypass capacitor, which is required for transient performance. Connect C3 from VBIAS to GND.
J1 Jumper The jumper connects EN to VBIAS for automatic startup.
1
This component varies depending on the evaluation board type ordered.