Datasheet

RedyKit User Guide
UG-147
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: [phone] • www.analog.com
RedyKit™ for the ADP122 LDO
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 4
FEATURES
All-voltage options for evaluation
Surface-mount ADP122 5-lead TSOT parts that can be easily
soldered to the evaluation boards
Additional parts for prototyping
ADP122UJZ-REDYKIT CONTENTS
1 ADP122-2.5-EVALZ evaluation board V
OUT
2.5 V
1 ADP122-3.3-EVALZ evaluation board V
OUT
3.3 V
3 each ADP122 voltage options in a labeled bag
09093-002
Figure 1. ADP122UJZ-REDYKIT
TYPICAL APPLICATION CIRCUIT
2
3
1
4
5
V
IN
= 2.3V TO 5.5V V
OUT
= 1.8V
VIN
GND
EN
VOUT
NC
C
IN
1µF
C
OUT
1µF
ADP122
OFF
ON
09093-001
Figure 2.
GENERAL DESCRIPTION
The ADP122UJZ-REDYKIT allows simplified prototyping and
evaluation and is available for every standard fixed output voltage
option in the ADP122 product family. The kit allows the user to
evaluate the voltage options with one easy to order kit.
All surface-mount ADP122 parts are sorted and stored in the
kit with the Analog Devices, Inc., part number and fixed output
voltage clearly printed on each zip-top bag.
The kit can be used in the engineering lab to evaluate required
voltage options. If other voltage options must be evaluated, a
different part from the kit can be easily soldered onto one of the
evaluation boards supplied with the kit.
The ADP122UJZ-REDYKIT is available with fixed 2.5 V and 3.3 V
evaluation boards. The kit also contains additional parts for
prototyping. The kit enclosure, which contains individually
packaged parts and the two evaluation boards, is packaged in
an ESD foam pad inside a treated cardboard box that measures
8.7" (L) × 7.9" (W) × 1.75"(H), that is, 22 cm (L) × 20 cm (W) ×
4.5 cm (H).
The ADP122 evaluation board data sheet, UG-055, can be
found at www.analog.com.