Datasheet

ADP1048-600-EVALZ PRD 1363
Rev. 1.3 | Page 10 of 26
ADP1048 PROGRAMMING SOFTWARE
The goal of this evaluation kit is to allow the user to get an insight into the flexibility offered by the extensive programming
options offered by the ADP1048. Several test points on the board allow easy monitoring of the various signals. The user can
also use the software to program multiple responses (such as disable power supply or disable the PWM) for various fault
conditions. There are several main windows where the user can use to program and evaluate the PSU. They can be
accessed from the Setup window in the GUI. The ADP1048 can be easily programmed to modify the behavior of the PSU
under different fault and load conditions without any hardware changes. All the changes are purely through software and do
not require desoldering components and replacing them with new values to specify a different operating condition