Datasheet

ADN4690E/ADN4692E/ADN4694E/ADN4695E Data Sheet
Rev. A | Page 6 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= T
MIN
to T
MAX
, unless otherwise noted.
Table 6.
Parameter Rating
V
CC
–0.5 V to +4 V
Digital Input Voltage (DE, , DI)
–0.5 V to +4 V
Receiver Input (A, B) Voltage
Half-Duplex (ADN4690E, ADN4694E) –1.8 V to +4 V
Full-Duplex (ADN4692E, ADN4695E) –4 V to +6 V
Receiver Output Voltage (RO) –0.3 V to +4 V
Driver Output (A, B, Y, Z) Voltage
–1.8 V to +4 V
ESD Rating (A, B, Y, Z Pins)
HBM (Human Body Model)
Air Discharge ±15 kV
Contact Discharge ±8 kV
IEC 61000-4-2, Air Discharge
±10 kV
IEC 61000-4-2, Contact Discharge ±8 kV
ESD Rating (Other Pins, HBM) ±4 kV
ESD Rating (All Pins)
FICDM ±1.25 kV
Machine Model ±400 V
Operating Temperature Range
−40°C to +85°C
Storage Temperature Range −65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 7. Thermal Resistance
Package Type
θ
JA
Unit
8-Lead SOIC 121 °C/W
14-Lead SOIC
86
°C/W
ESD CAUTION