Datasheet

ADN4663
Rev. 0 | Page 3 of 12
SPECIFICATIONS
V
CC
= 3.0 V to 3.6 V; R
L
= 100 Ω; C
L
= 15 pF to GND; all specifications T
MIN
to T
MAX
, unless otherwise noted.
Table 1.
Parameter
1, 2
Symbol Min Typ Max Unit Test Conditions
LVDS OUTPUTS (D
OUTx+
, D
OUTx−
)
Differential Output Voltage V
OD
250 355 450 mV See Figure 2 and Figure 4
Change in Magnitude of V
OD
for
Complementary Output States
ΔV
OD
1 35 |mV| See Figure 2 and Figure 4
Offset Voltage V
OS
1.125 1.2 1.375 V See Figure 2 and Figure 4
Change in Magnitude of V
OS
for
Complementary Output States
ΔV
OS
3 25 |mV| See Figure 2 and Figure 4
Output High Voltage V
OH
1.4 1.6 V See Figure 2 and Figure 4
Output Low Voltage V
OL
0.90 1.1 V See Figure 2 and Figure 4
INPUTS (D
IN1
, D
IN2
)
Input High Voltage V
IH
2.0 V
CC
V
Input Low Voltage V
IL
GND 0.8 V
Input High Current I
IH
−10 ±2 +10 μA V
IN
= 3.3 V or 2.4 V
Input Low Current I
IL
−10 ±1 +10 μA V
IN
= GND or 0.5 V
Input Clamp Voltage V
CL
−1.5 −0.6 V I
CL
= −18 mA
LVDS OUTPUT PROTECTION (D
OUTx+
, D
OUTx−
)
Output Short-Circuit Current
3
I
OS
−5.7 −8.0 mA D
INx
= V
CC
, D
OUTx+
= 0 V or D
INx
= GND, D
OUTx−
= 0 V
LVDS OUTPUT LEAKAGE (D
OUTx+
, D
OUTx−
)
Power-Off Leakage I
OFF
−10 ±1 +10 μA V
OUT
= V
CC
or GND, V
CC
= 0 V
POWER SUPPLY
Supply Current, Unloaded I
CC
8 14 mA No load, D
INx
= V
CC
or GND
Supply Current, Loaded I
CCL
10 20 mA D
INx
= V
CC
or GND
ESD PROTECTION
D
OUTx+
, D
OUTx−
Pins ±15 kV Human body model
All Pins Except D
OUTx+
, D
OUTx−
±4 kV Human body model
1
Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground except V
OD
, ΔV
OD
, and ΔV
OS
.
2
The ADN4663 is a current mode device and functions within data sheet specifications only when a resistive load is applied to the driver outputs. Typical range is
90 Ω to 110 Ω.
3
Output short-circuit current (I
OS
) is specified as magnitude only; minus sign indicates direction only.