Datasheet

ADN2872
Rev. 0 | Page 5 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Rating
VCC to GND 4. 2 V
IMODN, IMODP −0.3 V to +4.8 V
PAVCAP, ERCAP, PAVSET, PAVREF, ERREF,
IBIAS, IBMON, IMMON, ALS, CCBIAS, RPAV,
ERSET, FAIL
−0.3 V to +3.9 V
DATAP, DATAN (Single-Ended Differential) 1.5 V
Junction Temperature (T
J
max) 125°C
Operating Temperature Range, Industrial −40°C to +85°C
Storage Temperature Range −65°C to +150°C
Power Dissipation (W)
1
(T
J
max − T
A
)/θ
JA
θ
JA
Thermal Impedance
2
48.6°C/W
θ
JC
Thermal Impedance
2
5.0°C/W
θ
JB
Thermal Impedance
2
28.4°C/W
1
Power consumption equations are provided in the Power Consumption
section.
2
θ
JA
, θ
JB
, and θ
JC
are estimated when the part’s exposed pad is soldered on a
4-layer JEDEC board at zero airflow.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION