Datasheet

REV.
ADN2830
–3–
ABSOLUTE MAXIMUM RATINGS
1
(T
A
= 25°C, unless otherwise noted.)
V
CC
to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Digital Inputs (ALS, Mode) . . . . . . . . . –0.3 V to V
CC
+ 0.3 V
Operating Temperature Range
Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . –65°C to +150°C
Junction Temperature (T
J
Max ) . . . . . . . . . . . . . . . . . 150°C
θ
JA
Thermal Impedance
2
. . . . . . . . . . . . . . . . . . . . 32°C/W
32-Lead LFCSP Package,
Power Dissipation . . . . . . . . . . . . . . (T
J
Max T
A
)/θ
JA
mW
Lead Temperature (Soldering 10 sec) . . . . . . . . . . . . . . 300°C
NOTES
1
Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute maximum rating condi-
tions for extended periods may affect device reliability.
2
θ
JA
is defined when the part is soldered onto a 4-layer board.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the ADN2830 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
B