Datasheet

ADN2817/ADN2818 Data Sheet
Rev. E | Page 10 of 40
ABSOLUTE MAXIMUM RATINGS
T
A
= T
MIN
to T
MAX
, VCC = V
MIN
to V
MAX
, VEE = 0 V,
C
F
= 0.47 µF, SLICEP = SLICEN = VEE, unless otherwise noted.
Table 5.
Parameter Rating
Supply Voltage (VCC)
4.2 V
Input Voltage (All Inputs)
Minimum VEE − 0.4 V
Maximum VCC + 0.4 V
Junction Temperature, Maximum 125°C
Storage Temperature Range −65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL CHARACTERISTICS
Thermal Resistance
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages, on a
4-layer board with the exposed paddle soldered to VEE.
Table 6. Thermal Resistance
Package Type θ
JA
Unit
32-Lead LFCSP 28 °C/W
ESD CAUTION