Datasheet

REV.

ADM660/ADM8660

–3–

Power Dissipation, RU-16 . . . . . . . . . . . . . . . . . . . . . 500 mW

(Derate 6 mW/°C above +50°C)

, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 158°C/W

Operating Temperature Range

Industrial (A Version) . . . . . . . . . . . . . . . . –40°C to +85°C

Storage Temperature Range . . . . . . . . . . . –65°C to +150°C

Lead Temperature Range (Soldering 10 sec) . . . . . . . . +300°C

Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . +215°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C

ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >2000 V

This is a stress rating only; functional operation of the device at these or any other

conditions above those indicated in the operation section of this specification is not

implied. Exposure to absolute maximum rating conditions for extended periods

may affect device reliability.

ABSOLUTE MAXIMUM RATINGS*

= +25°C, unless otherwise noted.)

Input Voltage (V+ to GND, GND to OUT) . . . . . . . . +7.5 V

LV Input Voltage . . . . . . . . . . (OUT – 0.3 V) to (V+, +0.3 V)

FC and OSC Input Voltage

. . . . . . . . . . . (OUT – 0.3 V) or (V+, –6 V) to (V+, +0.3 V)

OUT, V+ Output Current (Continuous) . . . . . . . . . . . 120 mA

Output Short Circuit Duration to GND . . . . . . . . . . . 10 secs

Power Dissipation, N-8 . . . . . . . . . . . . . . . . . . . . . . . 625 mW

(Derate 8.3 mW/°C above +50°C)

, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 120°C/W

Power Dissipation, R-8 . . . . . . . . . . . . . . . . . . . . . . . 450 mW

(Derate 6 mW/°C above +50°C)

, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 170°C/W

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

ADM660/ADM8660 features proprietary ESD protection circuitry, permanent damage may occur on

devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are

recommended to avoid performance degradation or loss of functionality.