Datasheet

ADM560/ADM561
Rev. B | Page 4 of 12
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 2.
Parameter Rating
V
CC
−0.3 V to +6 V
V+ (V
CC
− 0.3 V) to +14 V
V− +0.3 V to −14 V
Input Voltages
T
IN
−0.3 V to (V+, +0.3 V)
R
IN
25 V
Output Voltages
T
OUT
(V+, +0.3 V) to (V−, −0.3 V)
R
OUT
−0.3 V to (V
CC
+ 0.3 V)
Short-Circuit Duration
T
OUT
Continuous
Power Dissipation
SSOP 900 mW
SOIC 900 mW
Operating Temperature Range
Commercial (J Version) 0°C to +70°C
Storage Temperature Range −65°C to +150°C
Lead Temperature
(Soldering, 10 sec)
+300°C
ESD Rating >2000 V
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.