Datasheet

REV. 0 –3–
ADM5170
ABSOLUTE MAXIMUM RATINGS*
(T
A
= 25°C unless otherwise noted)
V
DD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +15 V
V
SS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–15 V
Input Voltages
V
IN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.3 to (V
DD
+ 0.3 V)
Ouput Voltages
V
OUT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –12 V to +12 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . . . Continuous
Power Dissipation Plastic DIP . . . . . . . . . . . . . . . . . . . . 1250 mW
(Derate at 12.5 mW/°C above +50°C)
θ
JA
, Thermal Impedance . . . . . . . . . . . . . . . . . . . . . . . . . 75°C/W
Power Dissipation PLCC . . . . . . . . . . . . . . . . . . . . . . . 1000 mW
(Derate at 10 mW/°C above +50°C)
θ
JA
, Thermal Impedance . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
Operating Temperature Range
Commercial (J Version) . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Industrial (A Version) . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Lead Temperature (Soldering 10 sec) . . . . . . . . . . . . . . . . +300°C
Vapour Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C
*This is a stress rating only and functional operation of the device at these or any
other conditions above those indicated in the operation sections of this specifica-
tion is not implied. Exposure to absolute maximum rating conditions for extended
periods of time may affect reliability.
ORDERING GUIDE
Model Temperature Range Package Option
ADM5170JN 0°C to +70°C N-28
ADM5170AN –40°C to +85°C N-28
ADM5170JP 0°C to +70°C P-28A
ADM5170AP –40°C to +85°C P-28A
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the ADM5170 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
RS-232/RS-423
MODE SELECT
SLEW RATE
CONTROL
MS+
MS–
SRA
EN
V
IN
R
L
C
L
Figure 1. Timing Test Circuit
90%
t
F
10%
90%
10%
t
R
V
IN
V
OUT
Figure 2. Rise/Fall Timing Waveforms
Figure 3. Enable/Disable Timing Waveforms
INPUT
EN
OUTPUT
V
IN
= 0V
t
HZ
0.5V
0.5V
t
LZ
t
ZL
t
ZH
90%
90%
1.5V
1.5V
OUTPUT
V
IN
= 5V
V
OL
V
OH