Datasheet

ADM3485E
Rev. D | Page 5 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted.
Table 3.
Parameter Values
V
CC
to GND –0.3 V to +6 V
Digital Input/Output Voltage (DE, RE, DI)
–0.3 V to +6 V
Receiver Output Voltage (RO) –0.3 V to (V
CC
+ 0.3 V)
Driver Output (A, B)/
Receiver Input (A, B) Voltage −8 V to +13 V
Driver Output Current ±250 mA
Power Dissipation (8-Lead SOIC_N) 650 mW
Operating Temperature Range –40°C to +85°C
Storage Temperature Range –65°C to +150°C
Lead Temperature, Soldering (10 sec) 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
ESD Rating
Human Body Model (A, B) ±15 kV
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 4. Thermal Resistance
Package Type θ
JA
Unit
8-Lead SOIC_N 158 °C/W
ESD CAUTION