Datasheet

Data Sheet ADM3053
Rev. B | Page 7 of 20
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted. All voltages are relative to
their respective ground.
Table 6.
Parameter Rating
V
CC
−0.5 V to +6 V
V
IO
−0.5 V to +6 V
Digital Input Voltage, TxD −0.5 V to V
IO
+ 0.5 V
Digital Output Voltage, RxD −0.5 V to V
IO
+ 0.5 V
CANH, CANL −36 V to +36 V
V
REF
−0.5 V to +6 V
R
S
−0.5 V to +6 V
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −55°C to +150°C
ESD (Human Body Model)
3 kV
Lead Temperature
Soldering (10 sec) 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
θ
JA
Thermal Impedance 53°C/W
T
J
Junction Temperature 130°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Table 7. Maximum Continuous Working Voltage
1
Parameter Max Unit Reference Standard
AC Voltage
Bipolar Waveform
424
V peak
50 year minimum
lifetime
Unipolar Waveform
Basic Insulation 1074 V peak Maximum approved
working voltage per
IEC60950-1
Reinforced Insulation 537 V peak Maximum approved
working voltage per
IEC60950-1
DC Voltage
Basic Insulation 1074 V peak Maximum approved
working voltage per
IEC60950-1
Reinforced Insulation 537 V peak Maximum approved
working voltage per
IEC60950-1
1
Refers to continuous voltage magnitude imposed across the isolation
barrier. See the Insulation Lifetime section for more details.
ESD CAUTION