Datasheet

ADM2682E/ADM2687E
Rev. 0 | Page 7 of 24
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted. All voltages are relative to
their respective ground.
Table 9. Maximum Continuous Working Voltage
1
Parameter Max Unit Reference Standard
AC Voltage
Bipolar Waveform 424 V peak
All certifications,
50-year minimum
lifetime
Unipolar Waveform
Basic Insulation 600 V peak
Reinforced Insulation 537 V peak
Maximum approved
working voltage per
IEC 60950-1
DC Voltage
Basic Insulation 600 V peak
Reinforced Insulation 537 V peak
Maximum approved
working voltage per
IEC 60950-1
Table 8.
Parameter Rating
V
CC
−0.5 V to +7 V
Digital Input Voltage (DE, RE, TxD)
−0.5 V to V
DD
+ 0.5 V
Digital Output Voltage (RxD) −0.5 V to V
DD
+ 0.5 V
Driver Output/Receiver Input Voltage −9 V to +14 V
Operating Temperature Range −40°C to +85°C
Storage Temperature Range −55°C to +150°C
ESD (Human Body Model) on
A, B, Y, and Z pins
±15 kV
ESD (Human Body Model) on Other Pins
±2 kV
Thermal Resistance θ
JA
52°C/W
Lead Temperature
Soldering (10 sec) 260°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
1
Refers to continuous voltage magnitude imposed across the isolation
barrier. See the Insulation Lifetime section for more details.
ESD CAUTION
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.