Datasheet

ADM2484E Data Sheet
Rev. F | Page 6 of 16
ABSOLUTE MAXIMUM RATINGS
T
A
= 25°C, unless otherwise noted. Each voltage is relative to its
respective ground.
Table 7.
Parameter Rating
V
DD1
−0.5 V to +7 V
V
DD2
−0.5 V to +6 V
Logic Input Voltages −0.5 V to V
DD1
+ 0.5 V
Bus Terminal Voltages −9 V to +14 V
Logic Output Voltages −0.5 V to V
DD1
+ 0.5 V
Average Output Current per Pin ±35 mA
ESD (Human Body Model) on A, B, Y,
and Z Pins
±15 kV
Storage Temperature Range −55°C to +150°C
Ambient Operating Temperature Range −40°C to +85°C
θ
JA
Thermal Impedance 73°C/W
T
J
Junction Temperature
110°C
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
Absolute maximum ratings apply individually only, not in
combination.
Table 8. Maximum Continuous Working Voltage
1
Parameter Max Unit Reference Standard
AC Voltage
Bipolar Waveform
Basic Insulation 565 V
PEAK
50-year minimum
lifetime
Reinforced Insulation 565 V
PEAK
50-year minimum
lifetime
Unipolar Waveform
Basic Insulation
1131
V
PEAK
50-year minimum
lifetime
Reinforced Insulation 864 V
PEAK
Lifetime limited by
package creepage
maximum approved
working voltage per
IEC 60950-1
DC Voltage
Basic Insulation 1066 V
PEAK
Lifetime limited by
package creepage
maximum approved
working voltage per
IEC 60950-1
Reinforced Insulation 529 V
PEAK
Lifetime limited by
package creepage
maximum approved
working voltage per
IEC 60950-1
1
Refers to continuous voltage magnitude imposed across the isolation
barrier.
ESD CAUTION