Datasheet

ADM1065
Rev. D | Page 8 of 28
Pin No.
LFCSP
1
TQFP
Description Mnemonic
39 46 VDDCAP
Device Supply Voltage. Linearly regulated from the highest of the VPx, VH pins to a typical
of 4.75 V. Note that the capacitor must be connected between this pin and GND. A 10 μF
capacitor is recommended for this purpose.
40 47 GND
2
Supply Ground.
1
Note that the LFCSP has an exposed pad on the bottom. This pad is a no connect (NC). If possible, this pad should be soldered to the board for improved mechanical stability.
2
In a typical application, all ground pins are connected together.