Datasheet

ADM1060
Rev. B | Page 30 of 52
Table 34. PnGPIIMK Registers Bit Map (Power-On Default 0x00)
Bit Name R/W Description
7−4 AIMK4−AIMK1 R/W
If high, mask the GPIn input before it is used in function A.
3−0 BIMK4−BIMK1 R/W
If high, mask the GPIn input before it is used in function B.
PLB1 PLB2 PLB3 PLB4 PLB5 PLB6 PLB7 PLB8 PLB9
0x05 0x15 0x25 0x35 0x45 0x55 0x65 0x75 0x85
7 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1
6 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2
5 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3
4
Function A
GPI4 GPI4 GPI4 GPI4 GPI4 GPI4 GPI4 GPI4 GPI4
3 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1 GPI1
2 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2 GPI2
1 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3 GPI3
0
Function B
GPI4 GPI4 GPI4 GPI4 GPI4 GPI4 GPI4 GPI4 GPI4
Table 35. PnWDICFG Registers 0x06, 0x16, 0x26, 0x36, 0x46, 0x56, 0x66, 0x76, 0x86 (Power-On Default 0x00)
Bit Name R/W Description
7 APOLP R/W If high, invert the pulsed WDI input before it is used in function A.
6 AIMKP R/W If high, mask the pulsed WDI input before it is used in function A.
5 APOLL R/W If high, invert the latched WDI input before it is used in function A.
4 AIMKL R/W If high, mask the latched WDI input before it is used in function A.
3 BPOLP R/W If high, invert the pulsed WDI input before it is used in function B.
2 BIMKP R/W If high, mask the pulsed WDI input before it is used in function B.
1 BPOLL R/W If high, invert the latched WDI input before it is used in function B.
0 BIMKL R/W If high, mask the latched WDI input before it is used in function B.
Table 36. PnEN Register 0x07, 0x17, 0x27, 0x37, 0x47, 0x57, 0x67, 0x77, 0x87 (Power-On Default 0x00)
Bit Name R/W Description
7–3 Reserved N/A Cannot Be Used
2 INVOP R/W If high, invert the PLB output.
1 ENA R/W If high, enable function A.
0 ENB R/W If high, enable function B.